|
|
|
| 0000955 |
|
| Swim platform strut (one of six) with 5/16 inch holes., Grade 9 (Ti-3Al-2.5V) Titanium with Unpolished Finish |
|
Marine |
Strut /
Tubing, Round |
160.65
Each |
|
| 0000959 |
|
| Dive boat ladder that folds up with a flat deck plate and Sockets attachment, Grade 5 (Ti-6Al-4V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Flat Head, Square Drive Machine Screw |
3,297.52
Each |
|
| 0000960 |
|
| Dive boat ladder steps, main body, support struts and ladder hinge plate, Grade 5 (Ti-6Al-4V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Flat Head, Square Drive Machine Screw |
2,350.54
Each |
|
| 0000961 |
|
| Dive boat ladder hinge base plate, Grade 5 (Ti-6Al-4V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Flat, Custom |
425.58
Each |
|
| 0000962 |
|
| Dive boat ladder deck plate, Grade 5 (Ti-6Al-4V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Flat, Normal |
386.12
Each |
|
| 0000963 |
|
| Dive boat ladder, starboard strut Socket, Grade 5 (Ti-6Al-4V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Flat, Custom |
67.64
Each |
|
| 0000964 |
|
| Dive boat ladder, port strut Socket, Grade 5 (Ti-6Al-4V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Flat, Custom |
67.64
Each |
|
| 0000965 |
|
| Dive boat ladder hinge Bolt, Grade 5 (Ti-6Al-4V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Hex, Normal |
18.32
Each |
|
| 0000966 |
|
| Dive boat ladder that folds up with a flat deck plate and Sockets attachment, Grade 9 (Ti-3Al-2.5V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Tubing, Round |
Call (302) 249-3295 |
|
| 0000967 |
|
| Dive boat ladder steps, main body, support struts and ladder hinge plate, Grade 9 (Ti-3Al-2.5V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Tubing, Round |
Call (302) 249-3295 |
|
| 0000968 |
|
| Dive boat ladder, port strut Socket, Grade 9 (Ti-3Al-2.5V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Flat, Custom |
Call (302) 249-3295 |
|
| 0000969 |
|
| Dive boat ladder, starboard strut Socket, Grade 9 (Ti-3Al-2.5V) Titanium with Unpolished Finish |
|
Marine |
Custom Fabrication /
Flat, Custom |
Call (302) 249-3295 |
|
| 0007496 |
|
| Two Hole Padeye 66mm long for 1/4 inch Flat Head Screws, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Hardware /
Padeye |
Call (302) 249-3295 |
|
| 0008921 |
|
| Rudder shaft bearing cover plate 207mm X 90mm X 3mm, Grade 2 (CP) Titanium with Polished Finish |
|
Marine |
Hardware /
Rudder Shaft Part |
168.26
Each |
|
| 0018746 |
|
| Ball Stud with 6mm ball and M5-0.8 X 11mm threaded end, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Ball Joint Linkages /
Ball Stud |
Call (302) 249-3295 |
|
| 0018747 |
|
| Ball Stud with 6mm ball and M5-0.8 X 13mm threaded end, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Ball Joint Linkages /
Ball Stud |
Call (302) 249-3295 |
|
| 0021911 |
|
| 3/16 inch 6Al-4V Forged Allied Titanium Long D Shackle with captive locking pin, 0.420 inch jaw width and 1-1/2 inch jaw depth from the inside of the pin, Grade 5 (Ti-6Al-4V) Titanium with Sandblasted Finish |
|
Marine |
Shackle, Forged /
Shackle, D Long |
Call (302) 249-3295 |
|
| 0021913 |
|
| 5/16 inch 6Al-4V Forged Allied Titanium Long D Shackle with captive locking pin, 0.72 inch jaw width and a 2-1/4 inch jaw depth from the inside of the pin, Grade 5 (Ti-6Al-4V) Titanium with Sandblasted Finish |
|
Marine |
Shackle, Forged /
Shackle, D Long |
Call (302) 249-3295 |
|
| 0025484 |
|
| 40mm X 40mm X 3mm wall thickness X 1111.3mm long Handrail Post, Grade 2 (CP) Titanium with Mirror Polish |
|
Marine |
Hardware /
Railing Post |
Call (302) 249-3295 |
|
| 0025925 |
|
| 6 inch Open Base Cleat Precision Investment Cast out of Allied Titanium (1/4 inch flat head machine screws on 1-1/2 inch centers), Grade 2 (CP) Titanium with Polished Finish |
|
Marine |
Hardware /
Cleats and Chocks |
114.57
Each |
|
| 0025951 |
|
| 6 inch Open Base weld on Cleat that is Precision Investment Cast out of Allied Titanium (Weld on to 38mm tubing), Grade 2 (CP) Titanium with Polished Finish |
|
Marine |
Hardware /
Cleats and Chocks |
90.27
Each |
|
| 0037347 |
|
| Sail Ring 3/16 X 1-1/4 inch I.D. X 1-5/8 inch O.D., machined with polished finish, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Sail Ring |
Call (302) 249-3295 |
|
| 0040570 |
|
| Rub strake 16 inches by 3/4 inch wide using #10 flat head screws, Grade 2 (CP) Titanium with Sandblasted Finish |
|
Marine |
Hardware /
Rub Rail/Strake |
70.46
Each |
|
| 0040574 |
|
| Vang bracket for custom 59' sailboat with sloop rig (attaches to the boom), machined, Grade 5 (Ti-6Al-4V) Titanium with Polished Finish |
|
Marine |
Rigging Parts /
Bracket |
Call (302) 249-3295 |
|
| 0040786 |
|
| Navigation Light Plate, 3mm X 70 X 214mm, weld on, Grade 2 (CP) Titanium with Polished Finish |
|
Marine |
Hardware /
Rectangular Plate |
35.51
Each |
|
| 0040787 |
|
| Circular Base Plate, 4mm X 76.2mm (3 inch) with three countersunk and counter bored holes for 1/4 inch flat head screws, weld on, Grade 2 (CP) Titanium with Polished Finish |
|
Marine |
Hardware /
Circular Plate |
27.34
Each |
|
| 0040787 |
|
| Circular Base Plate, 4mm X 76.2mm (3 inch) with three countersunk and counter bored holes for 1/4 inch flat head screws, weld on, Grade 2 (CP) Titanium with Polished Finish |
|
Marine |
Hardware | |
